Installation & Assembly of “GE” Coupling
|1. Ring, housing and bolts, ready for assembly -a spanner is the only tool needed.||2. Thoroughly lubricate Inside and outside of rubber ring with Vegetable based lubricant. This avoids pinching or nipping of the ring. Recommend use of ‘NMC’ Lubricant.|
|3. Slip the ring over one pipe and bring both the pipe ends together.||4. Slide the ring into central position over the pipe ends.|
|5. Put on the sections of the housing and insert the bolts and nuts.||6. Bolt up evenly until the nuts are fully tightened.
Ensure that the bolt sections of the half housings meet, metal to metal.