Repair Clamps, Dismantling Joints and Tees – Nanda Millar Company

Handiband Repair Clamp

admin — Mon, 04 Nov 2019 10:57:08 +0000

This repair clamp is for quick repair of leaks or holes in pipes. The installation is fast and simple. Just snap the clamp around the pipe. Drop bolt head through open-slotted lug. Tighten the nut. Range : DN15-DN400.

Download PDF

KWIK Tee

admin — Mon, 04 Nov 2019 10:42:32 +0000

A range of tapping Tees that allows flanged branched connections to be made to an existing water main, whist it remains pressurized. Kwik Tee can be used in conjunction with all popular pipe materials. Range : DN80-DN300.

Download PDF

SS Half Circle Repair Clamp

admin — Mon, 04 Nov 2019 10:30:58 +0000

It is one band clamp (SS Half circle repair clamp) with partial gasket. For the repair of small holes in pipes with OD from 21 mm. up to 323.9 mm. Working range 4 mm. for smaller size & up to 10 mm. larger sizes Available forW. P. up to 300 P51(20.4 Bar)

Download PDF

KWIK Tap

admin — Mon, 04 Nov 2019 10:09:44 +0000

A range of tapping clamps that provides a quick, cost effective method of installing or replacing service pipe connections, whilst under operating pressure. Kwik Tap can be used with standard drilling equipment.

Download PDF

KWIK Finger Repair Clamp

admin — Mon, 04 Nov 2019 09:54:35 +0000

These repair clamp provide an economical and permanent method of repairing damaged pipes from pin hole leaks to full 360° circumferential breaks. These clamps are light weight and easy to handle. Range : DN40-DN600.

Download PDF

Stainless Steel Repair Clamp & Saddle

admin — Mon, 04 Nov 2019 09:39:49 +0000

The pressure on which the clamp can be used will vary with the type of clamp, pipe OD, medium etc. Use the following table as a guide (recommended working pressure, in bars, under ideal circumstances) :

Download PDF

Stainless Steel Repair Clamp & Saddle