PIPING PRODUCTS – Nanda Millar Company

Junior Compressor Coupling

admin — Mon, 18 Nov 2019 12:11:14 +0000

Material	Mild Steel
Technique	Hot Dip Galvanised
Head Shape	Hex
Hardness	48-52 HRC
Corrosion Resistance	Yes

We are the leading provider of Junior Compressor Coupling These products are identified amid patrons for their noticeable features such as longer life, durability and nominal cost.

NMC Junior Compression Style 65 Coupling is a no thread coupling which is available for connecting plain end pipes without any threading. A few turns with the wrench and the conncetion is complete within 30 seconds. Every joint is a union and is flexible. Joint is bottle-tight. They are available in 1/2 inch to 2 inch size.

GE Shouldered Coupling

admin — Mon, 18 Nov 2019 11:57:06 +0000

Material	Mild Steel
Usage/Application	Hydraulic Pipe
Shape	Round
Closing	Screw Closing
Corrosion Resistance	Yes

We are offering an extensive series of GE Shouldered Coupling. These products are extremely employed in the market for diverse purposes.

Shouldered type coupling is advocated where there is substantial abrasion in the piping system and reductionin the pipe thickness is not desirable. Rings weilded on the pipe ends enable the use of this versatile pipe jointing method.
RANGE: DN25- DN600

Download Brochure

Handiband Repair Clamp

admin — Mon, 04 Nov 2019 10:57:08 +0000

This repair clamp is for quick repair of leaks or holes in pipes. The installation is fast and simple. Just snap the clamp around the pipe. Drop bolt head through open-slotted lug. Tighten the nut. Range : DN15-DN400.

Download PDF

KWIK Tee

admin — Mon, 04 Nov 2019 10:42:32 +0000

A range of tapping Tees that allows flanged branched connections to be made to an existing water main, whist it remains pressurized. Kwik Tee can be used in conjunction with all popular pipe materials. Range : DN80-DN300.

Download PDF

SS Half Circle Repair Clamp

admin — Mon, 04 Nov 2019 10:30:58 +0000

It is one band clamp (SS Half circle repair clamp) with partial gasket. For the repair of small holes in pipes with OD from 21 mm. up to 323.9 mm. Working range 4 mm. for smaller size & up to 10 mm. larger sizes Available forW. P. up to 300 P51(20.4 Bar)

Download PDF

KWIK Tap

admin — Mon, 04 Nov 2019 10:09:44 +0000

A range of tapping clamps that provides a quick, cost effective method of installing or replacing service pipe connections, whilst under operating pressure. Kwik Tap can be used with standard drilling equipment.

Download PDF

KWIK Finger Repair Clamp

admin — Mon, 04 Nov 2019 09:54:35 +0000

These repair clamp provide an economical and permanent method of repairing damaged pipes from pin hole leaks to full 360° circumferential breaks. These clamps are light weight and easy to handle. Range : DN40-DN600.

Download PDF

Stainless Steel Repair Clamp & Saddle

admin — Mon, 04 Nov 2019 09:39:49 +0000

The pressure on which the clamp can be used will vary with the type of clamp, pipe OD, medium etc. Use the following table as a guide (recommended working pressure, in bars, under ideal circumstances) :

Download PDF

Stainless Steel Repair Clamp & Saddle

Flange Adaptors

admin — Sat, 02 Nov 2019 11:13:19 +0000

Gaskets: EPDM Compound Grade ‘E’ to BS EN 681-1:1996 suitable for water, sewage, many strong oxidizing chemicals & food applications or Nitrile compound Grade ‘G’ to BS:2494:1990 Grade G suitable for natural gas, petroleum products. Low aromatic fuels, compressed air, sewage & drainage. Stud & Nuts: Steel fastener to Grade 6.8 (SS available on request)

Download PDF

Dismantling Joints

admin — Sat, 02 Nov 2019 10:55:04 +0000

Dismantling Joints NMC Dismantling Joint is a double flanged fitting that allows longitudinal adjustments in flanged pipe systems. It has been developed to provide greater flexibility at both the planning and installation stages of flanged pipework systems and for subsequent maintenance.

Download PDF